| MODEL | Q-230 |
|---|---|
| Power Supply | |
| Operating Voltage | 100VAC 50/60Hz,120VAC60Hz, 230VAC 50/60Hz |
| Power consumption | 12W |
| Mains Connection | IEC receptacle |
| INPUT/ OUTPUT | |
| Connectors | 1/4" TRS, female XLR(pin 2 hot) |
| Input Impedance | Balanced 20k ohm,unbalanced 10k ohm |
| Max Input Level | >+21dBu balanced or unbalanced |
| CMRR | >40dB, typically >55dB at 1kHz |
| Type | Impedance-balanced/unbalanced, RF filtered |
| Output Impedance | Balanced 100 ohm,unbalanced 50 ohm |
| Max Output Level | >+21dBu balanced/ unbalanced into 2k ohm or greater |
| SYSTEM PERFORMANCE | |
| Bandwidth | 20Hz to 20kHz, +0.5/-1dB |
| Frequency Response | <10Hz to >50kHz, +0.5/-3dB |
| Dynamic Range | 108 dB |
| Signal-to-Noise | 90 dB |
| THD + Noise | <0.004% |
| Interchannel Crosstalk | <-80dB, 20Hz to 20kHz |
| FUNCTION SWITCHES | |
| EQ Bypass | Bypasses the graphic equalizer section in the signal path |
| Low Cut | Sweepable with rotary control from 20Hz – 100Hz |
| Range | Selects either +/- 6dB or +/-12dB slider boost/cut range |
| Soft limit | Activates soft limiting on the outputs to prevent excessive levels reaching the amplifier |
| DIMENSIONS/WEIGHT | |
| Dimension | 482.6 x 168 x 88 mm |
| Weight | 3.93 kg |