MODEL TITAN 15 ACTIVE
GENERAL INFO
System type Active 15" 2-way Bi-Amplified
Frequency response +/- 3db 50-20kHz
HF SECTION
Hf type Titanium Compression Driver
Horn dispersion (H x V) 90° x 60°
Hf exit size mm / inches 25mm / 1"
PHYSICAL FEATURES
Enclosure Material Injection Moulded Polypropylene
Enclosure Colour Grey or White or Black
Size (mm/inches) 381mm / 15"
IN / OUT PANEL (speaker Level)
Input connector XLR - 1/ 4" Combo jack
AMPLIFIER POWER
Power On Protection Power switch on / off mute
Thermal Protection Amplifier shutdown, auto reset
Low Line Voltage Shut Down 60% Nominal line voltage
Driver Protection Independent LF and HF limiters
DC Protection Yes
Short Protection Yes
Controls High (?10dB) 10kHz Shelving
Dimensions (HxWxD)
mm 708.3mm x 477.8mm x 401.77mm
inches 27.9" x 18.8" x 15.8"
Microphone / Transmitter
Maximum Input Level +22dBu
Impedance 4 ?
MIXER MODEL
INPUT IMPEDANCE Balanced: 20k ohms Unbalanced: 10k ohms
Clip Limiter Turns on approx 350W output
Limiter Indicator Red LED
Power Indicator Red LED
AC Power details
Power Supply High Efficiency Switching Mode Power Supply
AC Power Options AC100~120V / 220~240V, 50 / 60Hz
Power On Indicator LED
Rigging / Bracket / 10 M8 threaded inserts including 4
Mounting Options M8 threaded inserts on bottom in OmniMount 60.0-type footprint Pole-mount receptacle with lock screw 2 carry handles (one on each side) Optional wall-mount bracket
Impedance Balanced Balanced: 1k ohm - Unbalanced: 500 ohm
Line Output
Line Output Connector Switchable LOOP / MIX Balanced Male XLR
Input A - type Switchable balanced mic or line level input
Input Sensitivity Mic: -36dBu (-38.2dBv or 12.28mVrms)
Line: +4dBu (1.78dBv or 1.228Vrms)
Maximum Input Level +22dBu
Input Connector XLR - 1/ 4" Combo jack
Input Impedance Balanced: 20k ohms Unbalanced: 10k ohms
Input B - type Line level input
Input Sensitivity XLR - 1/4" Combo jack: 1.78dBv or 1.228Vrms
RCA: 0dBu (-2.2dBv or 0.775Vrms)
Maximum Input Level +22dBu
Input Connectors Combo jack: 1/4" - XLR / Summed dual RCA jacks
Bass Response Optimizer
("BRO"T) circuit +5dB at 60Hz
Subsonic Filter 30Hz, Second-order filter
Amplifiers
Low-Frequency (Class D) Rated 350W RMS, 700W Peak
High- Frequency (Class A/B) Rated 70W RMS, 140W Peak
Electronic Crossover 24dB/octave Linkwitz-Riley
Crossover Frequency 1.8kHz
Controls High (?10dB) 10kHz Shelving
Equalization Low (?10dB) 100Hz Shelving
DIMENSIONS & WEIGHT
Net weight ( kg / lbs ) 23.7kg / 52.67lbs
Gross weight ( kg / lbs ) 26.94kg / 59.27lbs